General Monitors Flame Detector

Flame Detector รุ่น FL4000H MSIR

• Multi-Spectral Infrared (MSIR) sensor array increases the detection range and field of view.
• Neural Network Technology (NNT) provides superior false alarm immunity.
• Designed to detect typical fires such as alcohol, n-heptane, gasoline, jet fuels and hydrocarbons.
• Can also see through dense smoke produced by diesels, rubber, plastics and lube oil fires.
• 4-20 mA analog output for remote alarm and fault indication.
• Dual Modbus compatibility with two-way addressable communications for status and alarm information and with optional 8 amp relays (3x).
• Optional HART digital communication signal transmitted on the 4-20 mA analog signal.

Flame Detector รุ่น FL3100H UV/ IR Unitized

• FL3100H UV/IR detector is appropriate for either indoor or outdoor use.
• FL3100H-H2 specifically detects hydrogen fires, with shorter wavelength of 2.7-3.2 micrometers.
• Three alarm/ fault relays and RS-485 output with Modbus RTU protocol for linking up to 128 detectors, \ 247 units with repeaters.
• Designed to detect unwanted fires and provide alarm outputs directly from detector while maintaining false alarm immunity.
• Explosion-proof housing allows detector information to be processed at the point of detection.
• Provides a stepped output 4-20 mA signal which indicates the detector’s status.
• Optional HART digital communication signal transmitted on the 4-20 mA analog signal.

Flame Detector รุ่น FL3101H UV Unitized

• FL3101H UV-only detector detects in UV spectral range, optimized for speed of response.
• Three alarm/fault relays and RS-485 output with Modbus RTU protocol for linking up to 128 detectors, 247 units with repeaters.
• Designed to detect unwanted fires and provide alarm outputs directly from detector while maintaining false alarm immunity.
• Explosion-proof housing allows detector information to be processed at the point of detection.
• Provides a stepped output 4-20 mA signal which indicates the detector’s status.
• Optional HART digital communication signal transmitted on the 4-20 mA analog signal.

Flame Detector รุ่น FL3110 (UV/IR) /FL3111 (UV)

• FL3110 UV/IR detector is appropriate for either indoor or outdoor use.
• FL3111 UV-only detector detects in UV spectral range, optimized for speed of response.
• FL3111HT ultraviolet (UV) flame detector operates in high temperatures up to 125°C.
• Three alarm/fault relays or RS-485 output with Modbus RTU protocol for linking up to 128 detectors, 247 units with repeaters.
• Explosion-proof housing allows detector information to be processed at the point of detection.
• Provides a stepped output 4-20 mA signal which indicates the detector’s status.
• Terminal enclosure certified EExe.

Flame Detector รุ่น FL3112 Digital Frequency Infrared

• Detects radiation from the infrared spectral region of a flame.
• Three alarm/fault relays or RS-485 output with Modbus RTU protocol for linking up to 128 detectors, 247 units with repeaters.
• Designed to detect unwanted fires and provide alarm outputs directly from detector while maintaining false alarm immunity.
• Explosion-proof housing allows detector information to be processed at the point of detection.
• Provides a stepped output 4-20 mA signal which indicates the detector’s status.
• Terminal enclosure certified EExe.

TA402A Single-Channel Trip Amplifier

• Zero Two Series panel card with relays for use with our Flame Detectors.
• Microprocessor-based electronics allow all options to be user selectable through front panel interface.
• LED indications of status, open collector and relay outputs for fault, low alarm and high alarm.
• Remote setup and interrogation, via RS-485 serial communications interface, available with CC02A
• Modbus communications module.

FL802 Multi-Channel Flame Detection Readout / Relay Display Module

• Capable of monitoring up to eight remote Flame Detectors.
• ALARM, WARN, and FAULT common relays and open collector outputs.
• LED readouts for each channel

TL100/TL105 Test Lamps

• Battery operated, rechargeable.
• TL100 designed to test UV detectors only and is intrinsically safe.
• TL105 designed to test UV, UV/IR and IR detectors and is explosion-proof.
• High-energy broad band radiation source emits sufficient energy in UV and IR spectra to activate detectors (TL105).
• Rotary switch selectable flicker rates (TL105).

บทความเกี่ยวกับ Flame Detector